Numerical simulation of prestrain history effect on ductile crack growth in mismatched welded joints.

Pipe reeling may lead to plastic pre-deformation (prestrain) around existing cracks in components; therefore, investigating whether this process accelerates or counteracts ductile crack growth, especially for strength mismatched welded joints, is warranted. This study focused on the effect of prestrain history on ductile crack growth in mismatched welded joints. A single-edge-notched tension specimen was selected for numerical study, and the crack was assumed to have existed before a prestrain history was applied. Crack growth resistance curves for plane strain and mode I crack growth under large-scale yielding conditions have been computed using the complete Gurson model. Meanwhile, symmetrical and non-symmetrical prestrain cycle modes with different loading levels were applied to the overmatched specimens. The outcome demonstrated that the mismatch ratio (the ratio between the yield stress of the weld metal and base metal) showed a significant effect on fracture resistance regardless of the stage at which the prestrain cycle loading was located. By contrast, the processing of the crack growth was weakened by the increase of prestrain values, and the symmetrical prestrain cycle resulted in greater plastic damage than the non-symmetrical prestrain cycle did. However, the initial crack length had a non-significant effect on the ductile fracture considering the prestrain and mismatch effects. [ABSTRACT FROM AUTHOR]