The Dielectric Strength of Nomex 410 Paper in Liquid Nitrogen Under Boiling Situations.

It is crucial for the successful application of high-temperature superconducting (HTS) power transformers that they are able to survive under abnormal operations, such as a short-circuit fault. Modeling, based on the design of a four-winding three-phase HTS power transformer, suggests severe boiling will occur on the surface of the winding during a short-circuit fault and will jeopardize the turn-to-turn insulation of the HTS power transformer. In this paper, a turn-to-turn insulation breakdown experiment platform involving the introduction of boiling on the surface of electrode has been built. Nomex 410 paper, one of the candidates for turn-to-turn insulation in the design of the HTS power transformer, was tested. The characteristics of dielectric strength of Nomex 410 in three different thicknesses (0.13, 0.18, and 0.25 mm) have been investigated, without boiling, as well as under different boiling situations, in an open bath of liquid nitrogen. The voltage application methods applied during both experiments test the electrical breakdown of Nomex 410 under a dynamic situation. The experiment results show that when under film boiling, compared to the test results for nucleate boiling, the dielectric strength of Nomex 410 paper decreases by approximately 38% of the value when no boiling is involved. Moreover, it is verified that the presence of an electric field accelerates the heat transfer between the liquid nitrogen and the heated electrode. [ABSTRACT FROM PUBLISHER]