Dynamic Control Allocation for Damping of Inter-Area Oscillations.

Use of actuator redundancy to achieve higher reliability is a widely accepted engineering design technique and is used in this study to build resiliency and ensure power system stability in the presence of high levels of renewables. This paper presents a new design method for fault-tolerant wide-area damping controllers (WADCs) using modal-based control allocation (MB-CA), which coordinates a set of actuators to contribute to damping of inter-area oscillations. In our proposed method, when an actuator fails or is unavailable (e.g., due to communication failure), the supervisory MB-CA distributes the control signals to the remaining healthy actuators based on effects on the modal system, desired control actions, and actuator constraints. Our proposed block offers the benefits of modular design where it is independent of the nominal WADC. The proposed method consists of mainly two design steps. The first step is to design a WADC based on a fault-free model using robust control methods. The second step is to design an MB-CA to manage actuator availability and constraints. To validate the feasibility and demonstrate the design principles, a set of comprehensive case studies are conducted on a modified 192-bus Western Electricity Coordinating Council system. Numerical results verify the effectiveness of the proposed approach in ensuring resiliency to different actuator failures and actuator availability. [ABSTRACT FROM PUBLISHER]