A Special Application Criterion of the Nine-Switch Converter With Reduced Conduction Loss.

The nine-switch converter is a multiport converter having two three-phase terminals and a dc-link, just like a 12-switch back-to-back (BTB) converter, but with 25% reduction of active switch count. However, the reduction from 12-switch to 9-switch may not always be an efficient choice considering losses in the switches. Only the load–source combination for the ac–ac common frequency mode and the source–source combination for the ac–dc different frequency (ac–dc DF) mode have been reported, so far, to yield relatively lower loss for the nine-switch converter. This paper shows that the nine-switch converter can have relatively lower loss even with a load–source combination, instead of only source–source combination in its ac–dc DF mode—when the upper terminal is connected to a dc load and the lower terminal is connected to an ac source. Mathematical proof is presented with derivation of the particular operating parameters for which the nine-switch converter will have comparatively lower losses. The analysis is validated with simulation and experimental results of a 1-kW system. Finally, the benchmark of the application criteria of the nine-switch converter for having lower conduction loss than the BTB converter is updated in this paper. [ABSTRACT FROM AUTHOR]