Flux and Product Distribution during Biological Treatment of Tetrachloroethene Dense Non-Aqueous-Phase Liquid.

Flux in non-aqueous-phase liquid (NAPL)-contaminated systems containing active microbial populations (including Dehalococcoides sp.) was investigated using a quantitative mass balance and phase distribution approach. Batch systems containing mixed NAPL with an initial tetrachloroethene (PCE) mole fraction ranging from 0.1 to 0.4 provided a means for comparing systems where mass transfer and aqueous concentration were controlled by the initial NAPL composition. Although the use of mixed NARL with increasing PCE mole fractions introduced a mass-transfer variable on the abiotic dissolution rate, it was determined that biological systems produced flux rates that were similar to each other regardless of the initial PCE mole fraction. Thus, organisms appeared to be dechlorinating near their maximum conversion rates, and the result was the accumulation of cis-1,2-dichloroethene (cDCE) followed by slow conversion to vinyl chloride (VC). Increases in the initial PCE mole fractions in the NAPL had a negative impact on product distribution due to the presence of a larger concentration of a more favorable electron acceptor. Because the mass converted to cDCE was present largely in the dissolved phase in all systems, the production of this metabolite was a favorable outcome in terms of NAPL dissolution. The pH dropped as low as 4.9 in active systems, indicating that the amount of MCI released during the reductive dechlorination process was large enough to overwhelm the buffering capacity. This pH effect was more pronounced in systems that exhibited extensive dechlo- rination to VC, further suggesting that rapid dechlorination of PCE NAPL can alter chemical characteristics in source zone regions. [ABSTRACT FROM AUTHOR]