A Wideband and Low-Profile Discrete Dielectric Lens Using 3-D Printing Technology.

In this paper, a novel wideband and low-profile discrete dielectric lens (DDL) antenna is presented. The proposed unit cells of DDL with the square-pyramid structure can realize wideband antireflection at an air–dielectric interface. By increasing the phase compensation range, the DDL antenna with very large gain bandwidth but large DDL thickness would be achieved. Furthermore, based on the large gain bandwidth technology, a novel multifolded lens structure is proposed to realize the low-profile design, in which a broadband polarization rotation reflection surface is proposed, while a polarized grid is used appropriately. Finally, the proposed multifolded DDL antenna can achieve a very large gain bandwidth, while the thicknesses of the DDL unit cell and the total antenna can be greatly reduced. For demonstration, the proposed multifolded DDL antenna is fabricated and measured. The fabrication was implemented by using a simple and low-cost 3-D printing technology. The results show that the proposed lens antenna can realize a 1 dB gain drop bandwidth of 43%, thickness of less than 1/3 focal-length-to-diameter ratio, and maximum aperture efficiency of 32%. Good agreement can be observed between the measurement and simulation. [ABSTRACT FROM AUTHOR]