Atmospheric Effect Correction for InSAR With Wavelet Decomposition-Based Correlation Analysis Between Multipolarization Interferograms.

This paper presents a wavelet decomposition-based correlation analysis (WDCA) method to correct atmospheric effects for interferometric synthetic aperture radar interferometry. The main idea is based on the a priori knowledge that the atmospheric effects are independent of the polarizations. This provides the possibility to find the identical atmospheric phases (ATPs) from the two different polarimetric interferograms. To achieve this goal, differential interferometry is performed with different topographic data so that the obtained differential interferograms (D-Infs) have different topographic errors. A polynomial incorporating topographic information is then used to remove the orbit error phase. Thus, the ATPs are the only identical components in the obtained D-Infs. A forward wavelet transform is then utilized to perform multiresolution analysis for the two obtained D-Infs. After this, we apply correlation analysis to identify the wavelet coefficients attributed to the atmospheric effects. The corrected D-Infs are then obtained by down-weighting the wavelet coefficients during inverse wavelet transform. The performance of the WDCA method was tested with L-band ALOS-1 PALSAR dual-polarization SAR images acquired over Southern California and Qilian mountain test sites characterized by different topographic conditions. For the Southern California test site, two interferometric pairs with long and short baselines (750 and 50 m) were formulated. The results show that the WDCA method can work well for both of the interferometric pairs, and the root-mean-square errors (RMSEs) of the obtained DEMs with respect to the Shuttle Radar Topography Mission digital elevation model (DEM) are 7.86 and 13.78 m, and show a decrease of 34.7% and 80.4% for the long- and short-baseline cases, respectively. For the Qilian mountain test site, the corrected interferogram can provide a DEM with an RMSE of 19.73 m, which is an improvement of 22.3% with respect to the DEM containing the atmospheric signals. In addition, the above two experiments show that compared with the existing topographic information-based wavelet method, this approach can remove not only the topography-dependent ATP but also the turbulent ATP. [ABSTRACT FROM AUTHOR]