Photovoltaic AC Module Based on a Cuk Converter With a Switched-Inductor Structure.

The development of a photovoltaic ac module composed of a high static gain nonisolated dc–dc converter with current source output characteristic followed by an unfolding low-frequency inverter is presented in this paper. The operation of the dc–dc converter with high static gain and with reduced switch voltage is obtained using the Cuk converter integrated with the switched-inductor technique. The nonisolated structure allows the elimination of the volume and losses of the power transformer and leakage inductance, and an output filter configuration is proposed to reduce the high-frequency ground leakage current. The grid-tied inverter operating in a discontinuous conduction mode (DCM) allows a sinusoidal output current with low harmonic distortion (THD = 3.72%) to be obtained without current control loop and without the use of a current sensor at the output. The maximum power point tracking operation is obtained without the use of the current sensor. The DCM operation increases the current stress, but the proposed converter presents two switches and two input inductors sharing the input current in these components. The theoretical analysis, design procedure, and experimental results are presented for a prototype with a dc input voltage Vi = 30 V, an ac output voltage Vo = 127 V, and output power Po = 180 W. [ABSTRACT FROM AUTHOR]