Design and thermal performance of spoke cavity prototype cryomodule of the Chinese Accelerator Driven Sub-critical system Injector-I.

The Chinese Accelerator Driven Sub-critical system (C-ADS) Injector-I is designed and constructed by the Institute of High Energy Physics (IHEP) of the Chinese Academy of Sciences (CAS) in Beijing, China. The test cryomodule (TCM), housing two 325 MHz spoke cavities and two solenoids and operating at 2 K, has been designed, assembled and commissioned since the beginning of 2012. The C-ADS Injector-I linac with the TCM successfully accelerated the proton beam to 3.68 MeV with the peak current of 10.1 mA in pulse mode. It is the world's first prototype of spoke cavity cryomodule with beam, and is an important step in the qualification of the cryomodule before series productions. This paper describes the detail of the design, operation and thermal performances of the prototype cryomodule. The analysis takes into account the heat loads of the main components (support posts, multilayer insulation and cavities) at various cryogenic temperature levels. The estimated heat loads of the cryomodule have been compared with the available experimental measurements, and the cryogenic deformations by simulation is verified by the experimental measurements by the wire position monitors (WPMs). The operation experiences including the cool down, alignment and heat load measurement are reported. • The 325 MHz spoke cavity prototype cryomodule has been designed, assembled and commissioned. • The thermal performance of the bottom-supported cryomodule has been proved firstly worldwide. • The cryomodule can be in a stable operation at 2 K and 31 mbar with beam. • The operation experiences including the cool down, alignment and measurement of heat loads are reported. • The linac with cryomodule had been accelerated successfully to 3.68 MeV@10.1 mA in pulse mode. [ABSTRACT FROM AUTHOR]