Implications of Capacitor Voltage Imbalance on the Operation of the Semi-Full-Bridge Submodule.

Future meshed high-voltage direct current grids require modular multilevel converters with extended functionality. One of the most interesting new submodule topologies is the semi-full-bridge because it enables efficient handling of dc-side short circuits while having reduced power losses compared to an implementation with full-bridge submodules. However, the semi-full-bridge submodule requires the parallel connection of capacitors during normal operation, which can cause a high redistribution current in case the voltages of the two submodule capacitors are not equal. The maximum voltage difference and resulting redistribution current have been studied analytically by means of simulations and in a full-scale standalone submodule laboratory setup. The most critical parameter is the capacitance mismatch between the two capacitors. The experimental results from the full-scale prototype show that the redistribution current peaks at 500 A if the voltage difference is 10 V before paralleling and increases to 2500 A if the difference is 40 V. However, neglecting very unlikely cases, the maximum voltage difference predicted by simulations is not higher than 20–30 V for the considered case. Among other measures, a balancing controller is proposed, which reduces the voltage difference safely if a certain maximum value is surpassed. The operating principle of the controller is described in detail and verified experimentally on a down-scaled submodule within a modular multilevel converter prototype. It can be concluded that excessively high redistribution currents can be prevented. Consequently, they are no obstacle for using the semi-full-bridge submodule in future HVdc converters. [ABSTRACT FROM AUTHOR]