Temperature and deformation dependence of structural evolution in polyamide 1010.

Polyamide 1010 (PA1010) is a representative of long-chain polyamides, used in applications requiring good mechanical, thermal and chemical properties. It has a lower melting point and slightly higher flexible properties compared to nylon 66. Very few reports have been focused on the structures and properties of long-chain polyamides, which brings some troubles on their processing and applications. For the purpose of understanding mechanical changes within different temperature interval, dynamic structure transition of PA1010 was investigated by wide-angle X-ray diffractometer (WAXD) equipped with a hot stretching stage. During the process of the simultaneous thermal stretched, in addition to the Brill transition phenomenon, it was also accompanied by changes in crystallinity, orientation and tensile force. Both annealing and stretching can promote crystallization, in addition, stretching can also induce and destroy crystallization. With stretch ratios increasing, the crystallinity increases firstly, reaches the maximum when stretch ratio is 2.25 times and then decreases. The degree of orientation increase firstly but increase poorly after 2.50 times. The stretch force increase gradually too. The stretch force has a stronger ability than temperature to induce the PA1010 undergo the Brill transition. The presented results show that Brill transition is completed and the α-crystal structure completely transformed into γ-crystal structure when the stretch ratio is 2.50 times. [ABSTRACT FROM AUTHOR]