Fracture toughness analysis of inclined crack in cylindrical shell repaired with bonded composite patch

Adhesively bonded composite patch repair has been widely used to restore or extend the service life of cracked structural components due to its efficiency and cost-effectiveness compared to mechanical repair technique. Current available knowledge on patch repair mainly focus on flat damaged structures and the corresponding analysis methods and empirical databases are computationally efficient. In contrast, only limited work has contributed to studying patch repair to curved damaged structures. Authors have developed an adhesive element in conjunction with a shell element to investigate the effect of curvature on the adhesive stresses and mode I fracture toughness of the cracked host shell in the curved repairs. In this paper, this technology is again employed to model an adhesively bonded composite patch repair to a cylindrical shell embedded with an inclined through-thickness crack. The total strain energy release rate (SERR), calculated by the modified virtual crack closure technique (VCCT), is used to evaluate the mix-mode fracture toughness of the damaged structure and further to estimate the efficiency of patch repair. An automatic mesh generation scheme is proposed to conduct a quick parametric analysis, which can also be used to structural optimization design of composite patch repair. The numerical results are presented to show the effect of curvature and inclined angle of the through-thickness crack on fracture toughness of the repaired structure subject to different loads. [Copyright &y& Elsevier]