Laser-Machining of Microchannels in NiTi-Based Shape-Memory Alloys: Experimental Analysis and Process Optimization.

Nickel–Titanium (NiTi)-based shape-memory alloys (SMA) are utilized in automotive, biomedical, microsystem applications because of their excellent shape memory effect, biocompatibility and super elastic properties. These alloys are considered difficult to cut—especially with conventional technologies because of the work hardening and residual stresses. Laser-machining is one of the most effective tools for processing of these alloys especially for microsystem applications. In this work, a thorough investigation of effect of process parameters on machining of microchannels in NiTi SMA is presented. In addition, a multi-objective optimization is carried out in order to find the optimal input parameter settings for the desired output performances. The results show that the quality of microchannels is significantly affected by input parameters. Layer thickness was found to have a significant effect on taper angle of the microchannel. Scan speed, layer thickness and scan strategy were found to have significant effects on both spatter thickness and top-width error, but in opposite directions. The multi-objective optimization-minimizing taper angle and spatter thickness revealed an optimal solution that was characterized by high frequency, moderate speed and low layer-thickness and track displacement. [ABSTRACT FROM AUTHOR]