A New Test Method for Evaluation of Solidification Cracking Susceptibility of Stainless Steel during Laser Welding.

A new test method named "Trapezoidal hot" cracking test was developed to evaluate solidification cracking susceptibility of stainless steel during laser welding. The new test method was used to obtain the solidification cracking directly, and the solidification cracking susceptibility could be evaluated by the solidification cracking rate, defined as the ratio of the solidification cracking length to the weld bead length under certain conditions. The results show that with the increase in the solidification cracking rate, the solidification cracking susceptibility of SUS310 stainless steel was much higher than that of SUS316 and SUS304 stainless steels during laser welding (at a welding speed of 1.0 m/min) because a fully austenite structure appeared in the weld joint of the former steel, while the others were ferrite and austenitic mixed structures during solidification. Besides, with an increase in welding speed from 1.0 to 2.0 m/min during laser welding, the solidification cracking susceptibility of SUS310 stainless steel decreased slightly; however, there was a tendency towards an increase in the solidification cracking susceptibility of SUS304 stainless steel due to the decrease in the amount of ferrite under a higher cooling rate. [ABSTRACT FROM AUTHOR]