Spherical edge burr formation during servo valve spool shoulder grinding: identifying the formation mechanism and designing a deburring device.

The basis for the formation of spherical edge burrs during servo valve spool shoulder grinding and a method for eliminating these burrs were investigated. Based on the results of this investigation, a grinding and synchronous deburring device was designed. A geometric model of single abrasive grains was established and the formation mechanism of the valve spool edge burrs was evaluated. Subsequently, the deburring process was analyzed via dynamic simulations, and based on the results, the aforementioned device was designed for mounting on an S20 precision cylindrical grinder. The correctness of the simulation and the feasibility of the device were verified via experiments. The experimentally observed burr shape and size corresponded closely to the simulated features. Moreover, the test device was effective in removing the edge burrs of the valve spool, as evidenced by the lack of sharp edge burrs. Hence, this device could be helpful in grinding the valve spool shoulder for significant improvement in the processing quality and efficiency. [ABSTRACT FROM AUTHOR]