Research on 3-GW Repetitively Operating Relativistic Backward Wave Oscillator.

Relativistic backward wave oscillator (RBWO) is a promising high-power microwave (HPM) generator. In past decades, many efforts have been devoted to improving its practicality, in which the repetitively operating RBWO has drawn much attention. However, two bottlenecks once limited its development. One is the generation of massive anode plasmas or even damage of the collector, and the other is the RF breakdown of electrodynamic structures. This article describes an RBWO which can operate repetitively with 3-GW microwave power by mitigating these two problems. First, a titanium collector, which shows better performance in resisting electron beam bombardment than the conventional stainless steel collector, is adopted. Meanwhile, water-cooling technology is applied to expedite heat dissipation of the collector. Second, since our investigations demonstrate that an anodic mechanism, not the conventional cathodic mechanism, is the main cause for RF breakdown of electrodynamic structures under strong guiding magnetic field, the titanium material is also used to manufacture the electrodynamic structures of the RBWO in order to increase its power capacity. The advantage of the titanium RBWO is verified in experiments. The application of these techniques, as well as some important surface treatment techniques such as polishing, ultrasonic washing, and vacuum baking, leads to the stable repetitive operation of the RBWO with 3-GW output power and 25-ns microwave duration under a repetition rate of 50 Hz. The successive operation time of the device is up to 20 s. [ABSTRACT FROM AUTHOR]