Directional relaying in presence of STATCOM during single pole tripping.

Static synchronous compensator (STATCOM), a shunt type flexible AC transmission system device, is used to control the voltage at different locations within a power system by absorbing/injecting reactive power. The dynamic control action associated with the operation of STATCOM in both capacitive and inductive modes is the reason for varying system condition and failure of different relaying schemes. Directional relaying is affected by the reactive current contributed by STATCOM in wide range of inductive to capacitive mode of operation. Further, single pole tripping (SPT) condition during STATCOM operation leads to mal‐function of the directional element due to phase change in sequence components of voltage and current. In this study, directional relaying is addressed for different types of faults in the presence of STATCOM connected at different locations during single phase auto reclosing period. Proposed directional relaying technique is based on the phase angle between positive sequence fault and pre‐fault apparent powers. Performance of the proposed scheme has been investigated for different types of faults for single and double circuit lines during SPT using simulated data of different power networks using PSCAD/EMTDC software. A comparative study is also carried out to verify the performance of the proposed scheme for different STATCOM operating conditions. [ABSTRACT FROM AUTHOR]