Design and implementation of an ultra‐high voltage DC‐DC converter based on coupled inductor with continuous input current for clean energy applications.

Summary: A single‐switch ultra‐high voltage DC‐DC converter is proposed in this paper. In the introduced structure, a voltage multiplier cell (VMC) and three‐winding coupled inductor (CL) are integrated to obtain an ultra‐large voltage gain. The input current ripple of the presented configuration is very low due to utilizing an inductor in the input part of the converter which is a very important factor in clean energy applications. The CL leakage inductance energy is successfully recovered, and the main power switch voltage stress is clamped because of using a passive clamp circuit. Therefore, a switch with low os‐state resistance can be applied, which declines the conduction losses as well as the cost of the suggested topology. Moreover, the common ground between the input and output of the proposed configuration makes it suitable for many applications such as photovoltaic systems. Some important merits include ultra‐high voltage gain, operating in low duty cycles, reduced voltage stress of semiconductors, continuous input current, and high efficiency, which make the introduced converter very suitable for clean energy applications. The operation principle, steady‐state analysis, design considerations, and theoretical efficiency analysis of the suggested converter are discussed completely in the paper. Also, the superiority of the proposed converter over recently suggested similar most important DC‐DC converters is demonstrated in the comparison study. Finally, the performance and theoretical analysis of the converter are validated with the experimental results at an output voltage of 450 V and an output power of 250 W. [ABSTRACT FROM AUTHOR]