3D Imaging of Lithium Protrusions in Solid‐State Lithium Batteries using X‐Ray Computed Tomography.

Solid‐state lithium batteries will revolutionize the lithium‐ion battery and energy storage applications if certain key challenges can be resolved. The formation of lithium‐protrusions (dendrites) that can cause catastrophic short‐circuiting is one of the main obstacles, and progresses by a mechanism that is not yet fully understood. By utilizing X‐ray computed tomography with nanoscale resolution, the 3D morphology of lithium protrusions inside short‐circuited solid electrolytes has been obtained for the first time. Distinguishable from adjacent voids, lithium protrusions partially filled cracks that tended to propagate intergranularly through the solid electrolyte, forming a large waved plane in the shape of the grain boundaries. Occasionally, the lithium protrusions bifurcate into flat planes in a transgranular mode. Within the cracks themselves, lithium protrusions are preferentially located in regions of relatively low curvature. The crack volume filled with lithium in two samples is 82.0% and 83.1%, even though they have distinctly different relative densities. Pre‐existing pores in the solid electrolyte, as a consequence of fabrication, can also be part‐filled with lithium, but do not have a significant influence on the crack path. The crack/lithium‐protrusion behavior qualitatively supports a model of propagation combining electrochemical and mechanical effects. [ABSTRACT FROM AUTHOR]