Numerical and Similarity Simulation Study on the Protection Effect of Composite Protective Layer Mining with Gently Inclined Thick Coal Seam.

Protective layer mining, as a dominating method for preventing coal and gas outburst, is generally adopted in highly gassy coal mines. In the absence of a suitable thickness coal seam to serve as the protective layer, the rock-coal composite protective layer was proposed in this paper. We conducted a series of simulations and engineering measurements to investigate the protective effect under the mining of the rock-coal composite protective layer of the Zhongtai coal mine located in the Hebi area of Henan, China. The numerical simulation analysis showed that, after the completion of protective layer mining, the minimum vertical stress of the No. 2-1 coal seam had been reduced to 3.46 MPa. The maximum vertical displacement of the No. 2-1 coal seam is 455.01 mm. The maximum expansion deformation of the No. 2-1 coal seam is 9.77‰; the effective pressure relief range is as long as 160 m. The similarity simulation experiment revealed that, after the completion of protective layer mining, the minimum vertical stress of the No. 2-1 coal seam is 4.0 MPa. The maximum vertical displacement of the No. 2-1 coal seam is 640 mm. The maximum expansion deformation of the No. 2-1 coal seam is 26.37‰; the effective protection range reaches 130 m. The engineering measurements demonstrated that the variation law of gas drainage parameters in the protected layer corresponds to the protected layer's vertical stress distribution law in numerical simulation and similarity simulation. With the exploitation of the composite protective layer, the protective layer's pressure begins to release. The average gas drainage concentration is 2-3 times of that before the composite protective layer mining. [ABSTRACT FROM AUTHOR]