Sahilkent (Bafra, Samsun) yöresindeki alüvyal zeminlerin sıvılaşma potansiyelinin CPT verileri kullanılarak araştırılması.

In this study, liquefaction potential of the alluvial soils consisting of clay, silt, and sand sized materials in Sahilkent (Bafra, Samsun) area was investigated using CPT data. Within the scope of the study, 20 boreholes each having a depth of 15 meters were drilled throughout Bafra district, and one undisturbed soil sample were obtained per meter from 5 of these boreholes located in Sahilkent area. Wet sieve, hydrometer, plastic limit, liquid limit, and natural water content determinations were conducted on 20 samples with high silt and sand content. In the preliminary evaluation, it was determined that there is a liquefaction potential in some regions at different depths, and in order to perform detailed liquefaction analyses, 15-meter-deep CPTu were carried out in 1 meter distance from those 5 borehole locations. In CPTu tests, data including cone tip resistance, sleeve friction, effective stress, relative stiffness, etc. were recorded every 5 cm, and average values of these data for each meter depth were used in the liquefaction analysis. Liquefaction analyses was conducted for an earthquake scenario of Mw = 7.2 and the liquefaction potential of the 15-meter soil layer in the study area was determined. As a result of the analyses, it was determined that no liquefaction will occur for an earthquake scenario of Mw = 7.2 in Sahilkent region. It is thought that high fine-grained content of the alluvium, and the fact that existing clean sand levels are located between fine-grained soil layers increase the resistance of the soil against liquefaction. [ABSTRACT FROM AUTHOR]