Research on the selective multi-stage two point incremental forming based on the forming angle.

For sheet metal parts with the vertical-wall partially and irregularly distributed on the sides (VWPIS) that contains both the difficult-form-surface (i.e., vertical-wall) with large forming angle and easy-to-form surface (i.e., gently tilted surface) with small forming angle, a selective multi-stage two point incremental forming (SMTPIF) on the basis of the forming angle was proposed. This SMTPIF method performs multi-stage forming only for the difficult-form-surface and gives different forming strategies and forming parameters to the different surface regions according to the forming angle. The algorithms for surface zoning, generation of the small forming angle surface for vertical-wall, generation of one-stage forming model by combining the easy-form-surface and small forming angle surface were presented. Meanwhile, the algorithm for the generation of the toolpath that is suitable to the SMTPIF was also given. The effectiveness of the proposed algorithm and the SMTPIF was verified by using the case studies, the finite element analysis, and the forming experiments. The results indicate that the SMTPIF can fabricate the VWPIS with short forming time and no sinking phenomenon. [ABSTRACT FROM AUTHOR]