A Fast and Fully Parallel Analog CMOS Solver for Nonlinear PDEs.

A general-purpose analog computing method is proposed to compute the continuous-time solutions of nonlinear partial differential equations (PDEs). The discrete-time difference operator in the standard finite difference time domain (FDTD) method is replaced by continuous-time delay operators that can be realized using analog all-pass filters. The resulting spatially discrete time-continuous (SDTC) update equations are realized using analog circuits which compute continuous-time solutions of the PDE with prescribed initial and boundary conditions. The proposed concept is demonstrated in simulation via an integrated circuit (IC) design of a nonlinear acoustic wave equation solver in 180 nm CMOS technology. Analog arithmetic operations (multiply, scale, and add) are realized in parallel using fully differential op-amps and analog multipliers. The proposed IC computes the PDE solution in parallel at 33 discrete spatial points and has a simulated bandwidth and power consumption of approximately 2 MHz and 3 W, respectively. The performance of the IC is simulated using foundry-supplied device models and quantified using i) the mean squared difference between the circuit simulation results and FDTD simulations, and ii) the noise to signal energy ratio. Acceptable accuracy is obtained, with error metric values varying between −7 and −30 dB for various configurations of the problem. Comparison of the custom analog IC simulations with MATLAB- and C-based FDTD code running on a modern workstation shows an expected average speedup of 205 × and 140 ×, respectively. [ABSTRACT FROM AUTHOR]