Simulation investigations on stepwise penetration of virtual anode in pseudospark discharge.

Pseudospark discharge is a special low pressure discharge and has been widely used in the gas switch and electron beam sources. From experiments, when the work pressure is relatively low, the electron beam current or loop current generated by a pseudospark discharge usually has two or more peaks, which has not been fully explained. In this paper, a single-gap pseudospark discharge model is established using 2D kinetic plasma simulation code VSim to study this phenomenon. According to the simulation results, when the anode voltage is 20 kV and the helium pressure is 100 Pa, the current has two peaks, which is similar to the experimental results, accompanied by the stepwise penetration of the virtual anode. This is mainly related to the formation and disappearance of the potential barrier in the cathode hole region. The formation of the potential barrier is caused by the consumption of ions at the cathode hole, and the disappearance is caused by the increase in electrons in the cathode cavity. By classifying the electrons, it is found that the increased electrons are generated by secondary emission caused by ion bombardment on the wall of the cathode. The simulation results also show that the stepwise penetration of the virtual anode can be suppressed or eliminated by increasing the working gas pressure, the secondary electron yield of the cathode material, or the trigger intensity. [ABSTRACT FROM AUTHOR]