Effects of Preparation and Activation Manner on Surface Area of Hierarchical Porous Carbons Derived from Nut (Euryale ferox) Shell.

Hierarchical nano‐micro carbon spheres porous carbon composites are successfully synthesized derived from Euryale ferox shells by the in‐situ decoration of the porous carbon with carbon spheres from carboxymethyl cellulose under the activation of KOH. Effects of fabrication and activation manner on surface area of porous carbons were investigated. The influence of activation temperature, impregnation ratio and modifier were analyzed. The specific surface area, pore volume and average pore diameter of porous carbon was characterized by N2 adsorption isotherms. Porous carbon produced at 800 °C with an impregnation ratio of 3, 2 hours of carbonization time, 20 hours immersion time has been found 2506 m2 g−1, 1.515 cm3 g−1 and 2.4 nm of the optimum specific surface area, pore volume and average pore diameter, respectively. The result of Fourier‐infrared spectroscopy analysis of the prepared porous carbon confirmed that it has abundant functional groups on the surface. The scanning electron micrographs of the prepared porous carbon indicated that a well‐developed pore structure was formed during the experiment. [ABSTRACT FROM AUTHOR]