Scale‐Bridging in Three‐Dimensional Fracture Networks: Characterizing the Effects of Variable Fracture Apertures on Network‐Scale Flow Channelization.

We incorporate observations of real fracture aperture variability observed in laboratory experiments into an ensemble of three‐dimensional discrete fracture network (DFN) simulations to characterize how variations of this micro‐scale feature can influence flow and transport behavior at the network scale. A shear fracture is created within a Marcellus shale sample, and the fracture aperture is measured using a triaxial direct‐shear device coupled with real‐time X‐ray imaging at in‐situ stress conditions. We construct an ensemble of fracture networks based on natural fractures in Marcellus shale and project regions of the experimental aperture field onto each fracture in the networks. Our calculations demonstrate that the degree of flow channelization, a network‐scale flow field structure, is dramatically increased by local changes in the aperture field that in turn affects flow and transport properties. Plain Language Summary: Fluid flow and solute transport through subsurface fractured media are inherently multi‐scale phenomena. Individual fractures connect to form complicated networks where relevant length scales span multiple orders of magnitude. In this letter, we address a long‐standing question in this research area regarding the relative impact of micro‐scale heterogeneity of fracture roughness, that is, internal aperture variability, on flow and transport at the network macro‐scale. To do so, we developed a methodology to incorporate real apertures obtained from in‐situ observations of dynamically fractured laboratory specimens into three‐dimensional discrete fracture network simulations for the first time. This methodology allows us to characterize how variations in fracture aperture can lead to increased flow channelization at the network scale, a phenomenon that we refer to as scale‐bridging. Our results show that this natural aperture variability not only modifies the local flow field within a single fracture but can re‐structure the global flow field of the entire network. In turn, the distribution of solute transport behavior is drastically modified, the networks' active surface area is drastically decreased, and the degree of flow channelization is markedly increased compared to reference networks that use equivalent smooth fractures. Key Points: We incorporate X‐ray imaged fracture apertures, obtained at high‐stress in‐situ conditions, into 3D DFN flow and transport simulationsWe observe the effects of incorporating real aperture data for fractures on network‐scale flow and transport properties for the first timeInclusion of aperture variability leads to scale‐bridging, where this small‐scale feature reorganizes the flow field at the network scale [ABSTRACT FROM AUTHOR]