A Novel High‐Performance TiO2‐x/TiO1‐yNy Coating Material for Silicon Anode in Lithium‐Ion Batteries.

Protective surface coatings on Si anodes are promising for improving the electrochemical performance of lithium‐ion batteries (LIBs). Nevertheless, most coating materials have severe issues, including low initial coulombic efficiency, structural fracture, morphology control, and complicated synthetic processing. In this study, a multifunctional TiO2‐x/TiO1‐yNy (TTN) formed via a facile and scalable synthetic process is applied as a coating material for Si anodes. A thin layer of amorphous TiO2 is uniformly coated onto Si nanoparticles by a simple sol–gel method and then converted into a two phase TiO2‐x/TiO1‐yNy via nitridation. The lithiated TiO2‐x provides high ionic and electrical conductivity, while TiO1‐yNy can improve mechanical strength that alleviates volume change of Si to address capacity fading issue. Owing to these synergetic advantages, TiO2‐x/TiO1‐yNy‐coated Si (Si@TTN) exhibits excellent electrochemical properties, including a high charge capacity of 1650 mA h g–1 at 0.1 A g–1 and 84% capacity retention after 100 cycles at 1 A g–1. Moreover, a significantly enhanced rate performance can be achieved at a high current density. This investigation presents a facile and effective coating material to use as the high‐capacity silicon anode in the emerging Si anode technology in LIBs. [ABSTRACT FROM AUTHOR]