A numerical analysis of buckle cable force of concrete arch bridge based on stress balance method.

It is difficult to calculate the buckle cable force for the cantilever casting concrete arch bridge. Relying on the 180 m-span Jiming Sansheng Bridge, this paper put forward one method to calculate the initial buckle cable force based on the stress balance method. Firstly, the stress balance equation considering only tensile stress was derived for the first time, and the feasible region of the initial cable force was calculated by the allowable tensile stress of the arch rib, which improved the original stress balance method. Then, using the influence matrix, the initial buckle cable force was optimized by reducing the allowable tensile stress of concrete in stages, and finally the optimal initial cable force was obtained. The practical engineering results show that it is feasible to calculate the initial buckle force. The maximum tensile stress of concrete arch during the cantilever casting process is 1.52 MPa, meeting the specification requirements. The deviation between the calculated and measured stress is less than 12%. The calculated cable force agrees with the measured cable force, and the deviation is less than 2%. The initial cable force is only tensioned once, improving work efficiency. The method and experience of this paper can provide a reference for the arch bridge constructed by cantilever casting. [ABSTRACT FROM AUTHOR]