Engineering multifunctional carbon black interface over Mn0.5Cd0.5S nanoparticles/CuS nanotubes heterojunction for boosting photocatalytic hydrogen generation activity.

[Display omitted] • Ternary Mn 0.5 Cd 0.5 S/CB/CuS hierarchical multiheterojunction system was designed. • Synergetic effect between multifunctional CB and CuS dual cocatalysts discussed. • High H 2 -production rate achieved over composite, 4.79-fold higher than Mn 0.5 Cd 0.5 S. Developing exceptionally robust and cost-effective cocatalysts to suppress charge recombination and reduce the reaction energy barrier remains an enormous challenge for producing high-valued and storable hydrogen fuel from photocatalytic water splitting. Herein, novel Mn 0.5 Cd 0.5 S nanoparticles modified with multifunctional carbon black (CB) nanowires and CuS nanotubes as dual cocatalysts were fabricated via sonochemical loading, and subsequent in-situ deposition routes. In this ternary hierarchical architecture, both CB nanowires and CuS nanotubes can serve as normal electron cocatalysts to markedly promote the hydrogen generation performance by lowering the thermodynamic overpotential for hydrogen evolution. Moreover, due to the high electrical conductivity, the multifunctional CB material can also function as a bridge to effectively capture and transmit the photoexcited electrons from Mn 0.5 Cd 0.5 S to CuS with outstanding electrocatalytic hydrogen evolution activity, thus maximizing the carrier separation and H 2 -evolution reaction kinetics. Interestingly, the cooperative effects between CB and CuS dual cocatalysts are also helpful for improving the oxidation capacity of photoexcited holes by lowering the valence band position of Mn 0.5 Cd 0.5 S, which further accelerates the electron-hole separation. As a result, the constructed Mn 0.5 Cd 0.5 S/CB/CuS hierarchical multiheterojunction catalyst shows the superior hydrogen generation efficiency of 819.9 μmol h−1 and excellent stability under simulated solar light irradiation. [ABSTRACT FROM AUTHOR]