Back to Search Start Over

DESIGN AND EXPERIMENT OF TELESCOPIC ROD TOOTH-RIBBED ROD ROLLER TYPE BUCKWHEAT THRESHING DEVICE.

Authors :
Jiawei WANG
Xiaoguo WANG
Xiaohong YU
Decong ZHENG
Zhiwei LI
Haiyan SONG
Source :
INMATEH - Agricultural Engineering. 2022, Vol. 67 Issue 2, p434-444. 11p.
Publication Year :
2022

Abstract

Aiming at the problems of high moisture content of stems during buckwheat harvesting and easy clogging of grid concave plates, a telescopic rod tooth-ribbed rod roller type threshing device was designed. The device is mainly composed of a ribbed rod roller and telescopic rod teeth. When the ribbed rod roller type rotates, the telescopic rod teeth do reciprocating telescopic motion. When the rod teeth rotate to the minimum threshing gap, the outstretch length is the smallest. When the rod teeth rotate to the top, the outstretch length maximum. The device solves the problems of poor material flow between threshing devices and clogging of grid concave plates. This threshing device was attached to the threshing performance test bench, and the buckwheat threshing test was performed. Through the single factor test, the threshing parameter range under the condition of low loss rate and damage rate of the threshing device was obtained: the speed of the threshing roller is 350~450 r/min, the feeding amount is 0.8~1.2 kg/s, and the threshing gap is 9~11 mm. Through the quadratic orthogonal rotation combination test, the results were fitted by multiple linear regression, and the regression equations of the loss rate and the broken rate were obtained, and the significance test was carried out. The response surface analysis of the main influencing factors was carried out to explore the influence of threshing parameters on the loss rate and damage rate. Through parameter optimization, the threshing parameter combination with the lowest loss rate and damage rate of the threshing device was obtained. The speed of the threshing roller is 405.47 r/min, the feed amount is 1.06 kg/s, and the threshing gap is 10.49 mm. Under these conditions, the loss rate is 0.05%, and the damage rate is 4.05%. The overall performance of the threshing device is good, which provides a theoretical basis for the research and development of buckwheat mechanized harvesting equipment. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
20684215
Volume :
67
Issue :
2
Database :
Academic Search Index
Journal :
INMATEH - Agricultural Engineering
Publication Type :
Academic Journal
Accession number :
158974357
Full Text :
https://doi.org/10.35633/inmateh-67-44