A quality control method based on improved IQR for estimating multi-GNSS real-time satellite clock offset.

• 1. A quality control method for estimating multi-GNSS real-time satellite clock offset is proposed. • 2. The satellite clock offset accuracy of GPS, Galileo, BDS-3 and Galileo is improved. • 3.The precise point positioning accuracy can be improved by using the clock offset. Real-time satellite clock offset plays a prominent role in the Global Navigation Satellite System (GNSS) community. However, the GNSS raw observations are impacted by outliers, resulting in the quality of observations becomes poorer, which will dramatically affect the performance of estimated multi-GNSS satellite clock offset in real-time. In this contribution, an improved Inter Quartile Range (IQR) method is proposed to improve the quality of multi-GNSS satellite clock offset estimation in real-time, in which the improvements include two aspects. Firstly, the empirical threshold C 1 is determined to adapt multi-GNSS satellite clock offset estimation, if one residual is not between (Q 1 - C 1 ∗ I Q R , Q 3 + C 1 ∗ I Q R) , the observation is deleted. More importantly, to guarantee the clock offset of each satellite can be estimated at each epoch, if one satellite corresponding to all observation of stations is deleted, the IQR is conducted again at the current epoch for these observations. Three schemes are designed: 50 stations are used to perform multi-GNSS satellite clock offset estimation in real-time, which are without quality control (S1), with the proposed quality control method in this contribution(S2), and with quality control method using 8.5 medians of residuals (S3). Compared to S1, the satellite clock offset accuracy of GPS, Galileo, BDS-3, and GLONASS for S2 can be significantly improved from 0.082 to 0.055 ns, 0.106 to 0.072 ns, 0.178 to 0.083 ns, and 0.146 to 0.100 ns, respectively. The improvement is 32.93%, 32.07%, 53.37%, and 31.51%, respectively. The clock offset performance of S2 is better than that of S3 in terms of stability and reliability for GPS, BDS-3, and GLONASS. Another 52 stations are applied to perform multi-GNSS kinematic real-time precise point positioning (RT-PPP). For the convergence time and positioning accuracy, the RT-PPP employing the satellite clock offset generated from S2 shows the best performance. The experiment shows that the proposed quality control method can obtain real-time, stable, high-precision, and reliable multi-GNSS real-time satellite clock offset. [ABSTRACT FROM AUTHOR]