İstanbul'da Zayıf Jeolojik Ortamlarda Metro Tüneli Kazılarının Neden Olduğu Oturma Teknesindeki Değişimler.

Due to increasing urban populations, many modern cities attempt to solve problems associated with the increasing demand for public transportation by constructing these systems underground. To create new metro lines, multiple underground excavations must be carried out in several locations; these are often close to each other in shallow and weak geological environments due to geometric limitations as well as access-related restrictions. Settlement troughs can occur as a result of these excavations, potentially causing serious damage to the structures within the settling area. This study evaluated the data collected by monitoring the extent of surface deformation during the excavation process in four different locations on the Kirazlı-Olimpiyat-Başakşehir Metro Line as well as two different locations on the Ataköy-İkitelli Metro Line; all of these sites were located on the European side of Istanbul. The geometry of the surface settlement troughs that formed due to these tunnel excavations was examined; a total of 12 sections were investigated in this study. An analysis of the monitoring data reveals that, in similar geological environments, successively excavated tunnels with the same geometry and tunnelling methods can disturb the geological environment through which the tunnels are constructed; in particular, if the second tunnel passes through the same section, this results in the formation of an increasing and asynchronous surface settlement trough. This result indicates that the material parameter (K), which affects the size of the settlement trough formed in scenarios with twin subway tunnels with close axes and that are excavated at shallow depths, has different values at the wings of the settlement trough that forms after the tunnels have been excavated, and that this change in K influences the shape of the surface settlement trough. This study suggests that predicting any changes in K, which is dependent on the characteristics of the surrounding rock, is important in order to mitigate any potential risks, especially at the design stage of any project that requires the excavation of multiple tunnels at shallow depths and in weak geological environments. [ABSTRACT FROM AUTHOR]