Back to Search Start Over

Nano-Fe/SiO2 catalysts prepared by facile colloidal deposition: Enhanced durability in Fischer-Tropsch synthesis.

Authors :
Liu, Yaqian
Pan, Cong
Zou, Yongrong
Wu, Feng
You, Zhixiong
Li, Jinjun
Source :
Fuel. Feb2023:Part 2, Vol. 333, pN.PAG-N.PAG. 1p.
Publication Year :
2023

Abstract

[Display omitted] • Silica-supported nano-Fe 2 O 3 for FTS was prepared by colloidal deposition method. • Nano-Fe/silica showed higher selectivity to light olefins than impregnated catalyst. • Nano-Fe/silica exhibited significantly superior durability over impregnated catalyst. • Nano-Fe particles were geometrically favorable for coking resistance. Nano-iron catalysts exhibit good performances in the Fischer–Tropsch synthesis to lower olefins (FTO), however, there is still a lack of simple methods for their preparation. In this work, we introduced a facile colloidal deposition (CD) method to fabricate silica-supported Fe 2 O 3 nanoparticles using a colloidal solution readily prepared from ferric hydroxide. With increasing the Fe loading from 16.3 % to 31.6 %, the Fe 2 O 3 particle size increased from 1.3 to 6.1 nm. The catalytic performances in FTO were tested at a H 2 /CO molar ratio of 1. At a Fe loading of 30.4 %, the catalyst having a particle size of 4.7 nm showed the highest lower olefin selectivity and the lowest CO 2 selectivity, outperforming analogs prepared by impregnation method. Furthermore, this catalyst showed good stability in a 200-hour durability test, while the impregnated analogue quickly deactivated due to serious coking. Presumably, the effective contact areas between the nanoparticles and the generated carbon sheets are geometrically small, which results in weak van der Waals forces between them, preventing the former from being heavily covered by the latter. Besides, from the point of view of the carbide decomposition mechanism of coking, due to the relatively low volume to surface area ratios of the intermediate carbide nanoparticles, the surface concentrations of carbon atoms released from them are low, which delays the coke formation. This study may provide a simple method to fabricate supported nano-iron catalysts, and cast some light on understanding catalyst durability in FTO. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
00162361
Volume :
333
Database :
Academic Search Index
Journal :
Fuel
Publication Type :
Academic Journal
Accession number :
160171654
Full Text :
https://doi.org/10.1016/j.fuel.2022.126514