Insight into the anisotropic deformation of landslide sliding zone soil containing directional cracks based on in situ triaxial creep test and numerical simulation.

The mechanical behavior of in situ sliding zone soil is unique and is significant for the state identification and prediction of landslides. This study focuses on interpreting the anisotropic deformation observed on the sliding zone soil of the Huangtupo landslide during an in situ triaxial creep test; specifically, the deformation of the A-Surface (towards 35° dip direction) of the soil cube, which points approximately to the landslide sliding orientation, is significantly large. Such anisotropy could be attributed to damaged structure, assumed as pre-existing directional cracks, of the in situ soil. Therefore, a Discrete Element Method (DEM) model containing prefabricated cracks is established to investigate the deforming behavior of compressed soil during in situ creep test on the mesoscopic scale. Results indicated that the specimen's anisotropic deformation is intimately related to the presence of prefabricated cracks. Subjected to the prefabricated cracks, microcracks generated during the loading process of the specimen initiated and developed in a directional way, subsequently forming directed cracks. Then the directed cracks tend to form a complete slip zone. However, due to the insufficient vertical load, the directed cracks were unable to coalesce, and the soil mass did not fail during the in situ creep test. Thereafter, additional load was applied in the simulation model. The directed cracks then merged and a full slip zone formed, and the soil was completely destroyed. As a consequence, the anisotropic characteristics of compressed in situ sliding zone soil can be well explained in view of the cracks development. This study may help perceive the landslide deformation characteristics and facilitate the evaluation and prediction methods of landslide stability. • Anisotropic deformation of the in situ sliding zone during compression • Formation of cracked slip zone in a compressed soil sample • Brand new recognition on the in situ sliding zone soil with prefabricated cracks [ABSTRACT FROM AUTHOR]