Design Suggestions on Resistance from Flange of Sorbite Stainless Steel Plate Girder under Shear.

A new S600E sorbite stainless steel (SS), which performs outstanding mechanical properties, was introduced in a plate girder to enhance the resistant performance and durability. The resistance from the flange for S600E sorbite SS plate girders developing post-buckling capacity was investigated through numerical analyses, which included the material and geometrical nonlinearity. The value of distance between plastic hinges performed significant effects on resistance from flange. There was a certain distribution range of the flange plastic hinge. Hence, it was difficult to determine the value of distance between plastic hinges accurately based merely on the failure behavior. Considering the theoretical basis of EN 1993-1-4: 2006+A1, the new methods to obtain resistance from the flange and determine the value of distance between the plastic hinges were proposed to avoid the aforementioned error. The parametric study was conducted to investigate the effect of key parameters on the resistance from the flange. To take the above effect into account, a correction factor was proposed for the design equation in EN 1993-1-4: 2006+A1 to predict the distance between flange plastic hinges accurately. The comparison was conducted to validate the accuracy of the proposed equations. The results indicated that the new modified equation could be used to predict the resistance from the flange of the S600E sorbite SS plate girder more accurately. [ABSTRACT FROM AUTHOR]