Optimal Placement of Photovoltaic Distributed Generation Units in Radial Unbalanced Distribution Systems Using MATLAB and OpenDSS-Based Cosimulation and a Proposed Metaheuristic Algorithm.

In this paper, an improved slime mould algorithm (ISMA) is proposed for finding the optimal location and sizing of photovoltaic distributed generation units (PVDGUs) in unbalanced distribution systems (UDSs). The proposed method is developed by changing the control variable update mechanism of the original slime mould algorithm (SMA). Total power losses on distribution lines and voltage deviation index of all buses are minimized under the consideration of various constraints. The location and sizing of PVDGUs found by ISMA are added into the cosimulation between MATLAB and OpenDSS for reaching other remaining parameters of UDSs. In addition, sunflower optimization (SFO), social-ski drive (SSD), cuckoo search algorithm (CSA), salp swarm algorithm (SSA), bonobo optimizer (BO), and SMA are also run for finding PVDGUs placement solution on the unbalanced three-phase IEEE 123-bus test feeder. As a result, the proposed ISMA can reduce the power loss up to 78.88% and cut the voltage deviation up to 1.4779 pu while that of others is from 69.10% to 78.87% and from 1.5759 to 1.4996 pu. Thus, ISMA should be used to place PVDGUs in UDSs meanwhile the cosimulation between MATLAB and OpenDSS should be applied as a power flow calculation tool for UDSs. [ABSTRACT FROM AUTHOR]