The efficacy of soil washing for the remediation of per- and poly-fluoroalkyl substances (PFASs) in the field.

This paper aims to describe the performance of a soil washing plant (SWP) for remediating a per- and poly-fluoroalkyl substances (PFASs)-contaminated soil with a high clay content (61%). The SWP used both physical and chemical processes; fractionation of the soil particles by size and partitioning of PFASs into the aqueous phase to remove PFASs from the soil. Contaminated water was treated in series with granulated activated carbon (GAC) and ion-exchange resin and reused within the SWP. Approximately 2200 t (dry weight) of PFAS-contaminated soil was treated in 25 batches of 90 t each, with a throughput of approximately 11 t soil/hr. Efficiency of the SWP was measured by observed decreases in total and leachable concentrations of PFASs in the soil. Average removal efficiencies (RE) were up to 97.1% for perfluorocarboxylic acids and 94.9% for perfluorosulfonic acids. REs varied among different PFASs depending on their chemistry (functional head group, carbon chain length) and were independent of the total PFAS concentrations in each soil batch. Mass balance analysis found approximately 90% of the PFAS mass in the soil was transferred to the wash solution and > 99.9% of the PFAS mass in the wash solution was transferred onto the GAC without any breakthrough. [Display omitted] • Full-scale soil washing remediation of a high clay content, PFAS-contaminated soil. • Soil removal efficiencies were > 97% and > 95% for PFCAs and PFSAs, respectively. • Removal efficiency was independent of PFAS concentration per batch of soil washed. • The soil washing plant removed approx. 90% of the PFAS mass from untreated soils. • Washed soil was used as backfill and water within the treatment plant recycled. [ABSTRACT FROM AUTHOR]