Enhancement on Tb3+ luminescence in CaScBO4-based ceramic phosphors by Ce3+-induced resonance energy transfer and the generation of white light emission collaborated with Mn2+.

A series of Tb3+-doped, Ce3+,Tb3+-co-doped and Ce3+,Tb3+,Mn2+-tri-doped CaScBO 4 (CSB) ceramic phosphors were prepared by solid-state reaction. X-ray diffraction (XRD) was taken to confirm the phase purity of all as-prepared phosphors powder. Steady-state and transient-state fluorescence spectra were applied to evaluate the luminescence properties of the phosphors. The results indicated that significant enhancement on Tb3+ luminescence was successfully realized by the Ce3+-induced resonance energy transfer and confirmed that the energy transfer from Ce3+ to Tb3+ was governed by an electronic dipole-dipole interaction. Compared to the CSB:Tb3+ phosphors whose optimal excitation located at 378 nm, the occurrence of Ce3+-Tb3+ energy transfer not only allowed the optimal excitation to peak at around 390 nm but also gifted the CSB:Ce3+,Tb3+ phosphors color tunability from blue, cyan to green. Then, two different designs of white light by the introduction of Mn2+ luminescence were performed. One was the combination of CSB:Ce3+,Tb3+ and CSB:Ce3+,Mn2+ phosphors, based on the co-excitation of the above two phosphors at the same wavelength. Another was the direct use of the tri-doped CSB:Ce3+,Tb3+,Mn2+ phosphors. Both designs succeeded in the generation of white light emission. The performance of these two designs in real devices were also studied. The direct use of the tri-doped CSB:Ce3+,Tb3+,Mn2+ phosphor in white light-emitting diode (WLED) device can produce white light with a color rendering index (CRI) up to 85.3 while the use of the CSB:Ce3+,Tb3+ and CSB:Ce3+,Mn2+ phosphors combination can just produce a value of 76.6 in CRI. [ABSTRACT FROM AUTHOR]