Microwave-induced oxygen vacancy-rich surface boosts the cathode performance for proton-conducting solid oxide fuel cells.

In this study, both cathode powder preparations and fuel cell fabrications for proton-conducting solid oxide fuel cells (H–SOFCs) were performed using the microwave sintering technique. The microwave sintering approach produced Sr 2 Fe 1.5 Mo 0.25 Sc 0.25 O 6-δ (SFMS) cathode particles with a lower phase formation temperature and smaller grain size than the standard muffle furnace sintering method. The advantages of microwave sintering were also recognized during the fuel cell manufacturing process. Using the same electrolyte and anode, conventional sintering and microwave sintering were used to produce SFMS cathodes, resulting in varied fuel cell performance. The fuel cell output of the conventionally sintered cell was 1312 mW cm−2 at 700 °C, whereas the power density of the microwave-prepared cell achieved 1452 mW cm−2 under the same testing conditions, which was also higher than the performance of a number of recently reported H–SOFCs. Surface chemistry research revealed that microwave sintering generated more oxygen vacancies (Vo). Calculations based on first-principles indicated that the greater surface abundance of Vo increased the oxygen reduction reaction (ORR) activity. The benefits of microwave sintering can be discovered in both the powder preparation and cell construction stages, making it an intriguing and simple way to enhance the performance of H–SOFCs. [ABSTRACT FROM AUTHOR]