On the effect of an ANC system towards the transient pressure fluctuations caused by smart-grid controlled centrifugal pumps.

• Application of Active noise control in a pump system with variable point of operations for the very first time. • Key technology for smart-grid controlled pump system in order to avoid undesirable pressure pulsation related issues like vibration and noise. Smart-grid control aims to use current power converter technology of pump drives for grid stabilization. Hereby, fluctuations of the power grid frequency are transmitted to the pump drive resulting in pump speed changes. Along with the inherent impeller design these pump speed changes are resulting in pressure pulsations which propagate as hydro acoustic pressure waves throughout the pump system causing noise and vibration issues in the piping system. Therefor, in order to realize smart-grid control, a solution must be found to attenuate or counteract these hydro acoustic pressure waves. In an earlier work [1] , an active noise control (ANC) system to reduce pressure pulsations at a pump's blade passing frequency (BPF) was published with the focus on constant points of operation. However, utilizing smart-grid control will results in high gradients of the pump speed and constantly changing points of operation are to be expected. This paper aims to attack those kinds of operating conditions. Within this paper, moving frequencies of interest at different pump speed gradient with and without active attenuation are analyzed and extracted from time series data by means of Vold-Kalman order tracking filter. In relation to possible fluctuations in the power grids frequency, the active attenuation performance of the ANC system is evaluated. [ABSTRACT FROM AUTHOR]