A Method for Mathematical Modeling of Hydrodynamic Friction of Plunger Pairs with Consideration of Microgeometry.

The fuel injection system heavily relies on the high-pressure fuel pump, which plays a critical role in its overall performance. The fuel pump plunger is subjected to high levels of stress and experiences irregular lubrication during dynamic loads, causing premature wear. In the industrial sector, laser surface micro-texturing has been utilized to reduce friction and enhance anti-wear properties, and its positive impact has been supported by both theoretical and experimental evidence. This article presents a method for determining the hydromechanical characteristics of plunger pairs under conditions of hydrodynamic friction. The microgeometry of friction surfaces was taken into account through the cavitation effect of the lubricating fluid, described by the modified Reynolds equation. Software was developed according to the proposed method. The developed software can be used to analyze the contacting surfaces of plunger pairs and evaluate their tribotechnical characteristics based on the microgeometry parameters of the friction surfaces. The article also discusses the impact of the microgeometry parameters on the quality criteria of the hydromechanical characteristics of the plunger pairs. Computational examples are given for the analysis of contacting surfaces of plunger pairs separated by a lubrication layer. The technical characteristics are evaluated depending on the parameters of the microgeometry of the roughness of the friction surfaces. The influence of the microgeometry parameters on the quality criteria of the hydromechanical characteristics of the plunger pairs is presented. [ABSTRACT FROM AUTHOR]