Effect of MgO and Nb2O5 co-doping on the microwave dielectric properties of Y2Ti2O7 ceramics.

This study investigated the effects of MgO and Nb 2 O 5 co-doping on the microwave dielectric properties of Y 2 Ti 2 O 7 ceramics with a medium dielectric constant. Substituting (Mg 1/3 Nb 2/3)4+ for Ti4+ in Y 2 Ti 2 O 7 ceramics effectively enhanced the quality factor Qf. The interrelationship among the crystalline structure, microstructure, and microwave properties of Y 2 (Ti 1- x (Nb 2/3 Mg 1/3) x) 2 O 7 (0 ≤ x ≤ 0.15) sintered at 1500 °C with different holding times were examined using XRD, SEM, TEM, XPS, Raman, and network analyzer. The research findings indicate that all samples exhibited a single cubic pyrochlore phase without a second phase. Moreover, the densification temperature increased with an increase in (Mg 1/3 Nb 2/3)4+ content, and the relative density could be increased by increasing the sintering dwell time. The sample with x = 0.025 demonstrated an optimal densification temperature of 1500 °C. TEM/SAED pattern analysis revealed the existence of a "superlattice" due to the occurrence of a 1:2 cation ordering structure at high temperatures. As the dwell time was extended from 4 h to 12 h, the quality factor Qf increased from 10,830 GHz to 46,068 GHz. The sample with x = 0.025 sintered at 1500 °C for 12 h exhibited the best microwave dielectric properties ( p e r m i t t i v i t y (ε r) = 62.5, Qf = 46,068 GHz, and the temperature coefficient of frequency (TCF) = 290.8 p p m / °C). [ABSTRACT FROM AUTHOR]