Maldistribution of a Thermal Fluid along the U-Tube with a Different Bending Radius—CFD and PIV Investigation.

This paper investigates the effect of changing the bending radius of pipes on the maldistribution of velocity and turbulence of thermal fluid when flowing through a u-shaped tube bundle used in compact heat exchangers, among other applications. The study included three bending radii corresponding to successive rows of the actual tube bundle of a compact heat exchanger. Both liquid flow velocities recommended for compact heat exchangers and velocities elevated from the recommended ones were adopted. The results of the study were obtained by Computational Fluid Dynamics (CFD) and the performed experiment using the Particle Image Velocimetry (PIV) method. The limits of maldistribution were indicated by parameterizing this phenomenon with related geometric and flow values (turbulent flow intensity factor, flow velocity, pipe diameter, and bending radius). An increase in flow velocity above the recommended values did not result in a significant increase in turbulent flow intensity factor for u-tubes with large d/rg values. The shortest distance at which the return to steady-state flow conditions in a straight section of pipe downstream of an elbow took place was determined. This distance was 17d for geometry rg = 0.009 m, with velocity vp = 1.44 m/s. The localization of the areas of highest and lowest fluid velocity in the elbow element of the u-tube for extreme values of rg was opposite. This fact has an exploitable significance (non-uniform erosive effect of thermal fluid on pipes in different rows). [ABSTRACT FROM AUTHOR]