Experimental investigations into nonlinear dynamic behaviours of triply periodical minimal surface structures.

• Gyroid, IWP and Primitive TPMS structures are fabricated using stereolithography technology. • 3D printed TPMS structures are robustly tested under axial vibrations. • It is the first time that natural frequencies of complex porous composite structures structures has been benchmarked. • Damping properties of complex porous composite structures have been identified for the first time. • Nonlinear dynamic phenomena of TPMS based composite structures have been found. • New insights into nonlinear dynamics of composite structures are the precursor to engineering applications. Natural frequency, damping ratio and dynamic stiffness are fundamental to the performance of structures subjected to dynamic loads. Triply Periodic Minimal Surface (TPMS) composite structures, celebrated for their superior energy absorption capacity and specific strength, represent some of the most promising meta -structures. However, their dynamic properties are yet to be fully understood, thereby hindering their practical applications within civil engineering domains. Damping properties, crucial to vibration reduction, remain particularly elusive; previous studies have not successfully established a connection between these properties and the force excitation amplitude in TPMS structures. This study aims to compare the damping properties of different TPMS structures and to investigate their potential for adoption within civil engineering fields. Three types of TPMSs, including Schoen I-graph-wrapped package surface (IWP), Schwarz primitive (Primitive) and Schoen Gyroid (Gyroid), have been adopted to design solid and sheetal TPMS composite structures with identical relative density (50%) to compare their damping properties under varying excitation amplitudes. These TPMS structures are manufactured from photosensitive resin (UV resin) using stereolithography 3D printing technology. Owing to the lack of previous research into the damping properties and dynamic stiffness of TPMS structures as support structures, we have conducted single-freedom modal tests to determine the modal parameters, including natural frequency and damping ratios. Our novel results indicate that the natural frequency and damping ratio of the TPMS structures vary with the excitation amplitude. Additionally, the dynamic stiffness of TPMS structures reveals a similar decreasing trend to frequency when load amplitude escalates. As the excitation amplitude increases, the TPMS structures demonstrate softening and are capable of offering a higher vibration damping coefficient. Notably, the SS-Gyroid structure exhibits higher stiffness and damping ratio compared to other TPMS structures. These fresh insights pave the way for the integration of 3D printed smart TPMS structures within civil engineering, particularly for vibration reduction and efficient material usage. A judicious TPMS structure design can provide relatively high stiffness and damping ratio without excessive material use. [ABSTRACT FROM AUTHOR]