The research on the influence mechanism of internal deformation for the performance of Bi-2212.

Cable-in-conduit conductor (CICC), one of the most promising conductors for manufacturing magnets in magnetic confinement fusion devices, has attracted lots of attention. In the production of CICC, porosity control is necessary for its stability. The porosity control is usually realized by the diameter-reducing process, which would also lead to indentation damages to the elements of CICC-superconducting wires. In this article, systematic research of indentation damages was carried out on the next generation of high-temperature superconducting materials–Bi-2212 wires. The results indicate that the current carrying capacity of the indentation-damaged wire would first keep steady and then show exponential decline with the increase of indentation depth. The wires subjected to pre-overpressure (pre-OP) treatment exhibit slightly improved resistance against indentation damage at shallow indentation depths. However, their critical current (I c) deteriorates more rapidly at greater indentation depths when compared to wires that have not undergone the per-OP process. The following structural characterization analyzed the reasons for the property changes with the help of scanning electron microscopy, energy dispersive x-ray spectroscopy, computed tomography, and hardness tester. Misalignment between the Bi-2212 grains and shaped filaments was found in the indentation-damaged wires, with which the degradation in I c of the wires and the differences in properties of the two kinds of wires were further discussed. [ABSTRACT FROM AUTHOR]