Shaping characteristics of excavation contours in sequential controlled fracture blasting of rock-anchored beams in Shuangjiangkou underground powerhouse.

Influences of high in-situ stress generally need to be considered when excavating deep underground caverns. The dynamic fracture behaviors of rocks under blast loads were investigated by using the rock-anchored beam excavation in underground powerhouses of Shuangjiangkou Hydropower Station in Sichuan Province, China as the engineering background. To solve the problems of the poor blasting breakage effect of rocks and the difficulty in protecting surrounding rocks during excavation, mechanical properties of granite under static and dynamic loads were investigated and the sequential controlled fracture blasting (SCFB) method was adopted during in-situ tests. Based on the Riedel-Hiermaier-Thoma constitutive model and the strength criterion, software LS-DYNA was employed to simulate the dynamic propagation of blasting-induced cracks. The contour shaping effect obtained via numerical simulation is generally consistent with the test results. The results show that SCFB can to some extent control the direction of crack initiation and rock fracture behavior of the blasthole wall cracks and the spacing of successive bursting holes is about 10 times the diameter of the blastholes when the cracks between the blastholes are shaped the best effect. Moreover, the magnitude and direction of principal in-situ stress can both affect the propagation path and length of blasting-induced cracks. The results of the research on the excavation and construction of deeply buried underground caverns have a certain reference value. [ABSTRACT FROM AUTHOR]