Fabrication and Damping Property of Porous Cu–Al–Ni Shape Memory Alloys Fabricated using Different Raw Materials.

Porous Cu–Al–Ni shape memory alloys (SMAs) are fabricated via powder metallurgy method using Cu, Al, Ni powders and Cu–Al–Ni alloy powder as raw materials, respectively. It is found that the two kinds of specimens have similar macroscopic morphologies: connected pores are uniformly distributed in the Cu–Al–Ni matrix, forming a 3D network structure. By comparison, the specimen fabricated using alloy powder has much finer microstructures than the specimens fabricated using Cu, Al, Ni powders. After adding Ce element to the latter, the microstructure of the Cu–Al–Ni matrix is significantly refined because of the formation of Ce‐rich particles. Damping tests show that the latter has superior damping capacity than the former. With the increase of Ce content, the damping of the latter increases first and then decreases. When the Ce content reaches 0.05 wt%, the highest damping can be achieved. Correlated mechanisms are discussed based on the microstructural observations. [ABSTRACT FROM AUTHOR]