Effects of Sec-Octanol and Terpineol on Froth Properties and Flotation Selectivity Index for Microcrystalline Graphite.

Microcrystalline graphite is a valuable non-metallic mineral that can be separated by flotation, a physico-chemical processing method that uses air bubbles to capture mineral particles. The size and stability of the bubbles, which depend on the type and amount of frother added, affect the flotation performance and the recovery of water from the froth layer. However, the effects of different types of frother on the froth properties and water recovery of microcrystalline graphite flotation are not well understood. In this study, two common frothers, sec-octanol and terpineol, were compared in terms of their effects on the bubble size, froth layer height, water recovery, and flotation selectivity index (SI) of microcrystalline graphite flotation. It was found that sec-octanol produced smaller bubbles than terpineol, but also a slightly lower froth layer height. The water recovery was higher with sec-octanol than with terpineol. The SI values were similar for both frothers, indicating comparable flotation performance. This study revealed the differences between sec-octanol and terpineol in terms of their effects on the froth properties and water recovery of microcrystalline graphite flotation. These findings can help optimize the choice and dosage of frother for this important mineral processing method. [ABSTRACT FROM AUTHOR]