The non-plane initiation and propagation mechanism of multiple hydraulic fractures in tight reservoirs considering stress shadow effects.

• Reveal the formation mechanism of complex non-plane fractures near the wellbore. • The fracture initiation and propagation mechanisms of multiple hydraulic fractures are investigated. • Hydraulic fracture propagation is affected not only by stress shadow but also by inclined well orientation. • Stress shadowing effect in staged fracturing results in a large deflection angle of fractures when the horizontal principal stress difference is small. Multi-cluster fracturing in horizontal wells is an important stimulation technology for unconventional tight reservoirs. The interference among multiple simultaneously growing hydraulic fractures results in a non-uniform fluid distribution into fractures and non-planar fracture geometries. In this paper, the competition mechanism between perforations under the stress shadow, the formation mechanism of complex non-plane fractures near the wellbore, and the initiation and propagation mechanism of multiple hydraulic fractures are investigated by using the 3D lattice method. Also, the effects of fracture geometry, fracture spacing and rock mechanics parameters on the stress interaction among fractures are analyzed by the dislocation theory. The results showed the complexity of fracture initiation near the wellbore and the low efficiency of the perforation initiation in the case of spiral perforation, due to a strong interaction between perforations. However, these initial micro-cracks will eventually coalesce to be a macroscopical fracture which perpendicular to the direction of minimum principal stress. The study indicated that stress interaction and fracture propagation is significantly affected by inclined well orientation. The hydraulic fracture is more likely to deflect and propagate non-uniformly with the increasing width of hydraulic fracture, the decreasing spacing between perforation clusters and the increasing rock modulus. When the horizontal principal stress difference is small, it is obvious to cause a large deflection angle and sometimes furcation of fractures. This study can provide a theoretical basis and technical guidance for hydraulic fracturing design in tight reservoirs. [ABSTRACT FROM AUTHOR]