Ultrafast SET/RESET operation for optoelectronic hybrid phase-change memory device cells based on Ge2Sb2Te5 material using partial crystallization strategy.

Combination of nonvolatile storage and in-memory computing promises to break through the "memory bottleneck" that computing device adopts von Neumann architecture with individual computing and memory unit. Thus, the advanced nonvolatile memory device with ultrafast operation speed is urgently required. Here, the optoelectronic hybrid phase-change memory based on the Ge2Sb2Te5 material is proposed, where the picosecond laser induced reversible phase-change is utilized to write and erase the information while the resistance difference is adopted to realize the accurate information readout. Due to the significant difference in resistance between crystalline and amorphous states, a partial crystallization strategy can be adopted to achieve ultrafast SET operation. Results indicate that SET operation speed of the Ge2Sb2Te5 film and device unit can be as fast as 52 and 130 ps, respectively, while the RESET speed reaches 13 ps. In parallel, the resistance ratio of RESET to SET state is still as high as two orders of magnitude. By using partial crystallization strategy, the phase-change induced by picosecond laser only occurs from amorphous to face-centered-cubic crystalline state with low crystallinity and the defective octahedral motif is observed in the Ge2Sb2Te5 film, which is beneficial to achieve the ultrafast operation speed. At the same time, the ordered clusters existed in the as-deposited and picosecond laser induced RESET films can accelerate the nucleation process of the Ge2Sb2Te5 film, which is one of the important reasons for achieving ultrafast SET speed. The optoelectronic hybrid phase-change memory with ultrafast operation speed may be one of the promising solutions for the in-memory computing. [ABSTRACT FROM AUTHOR]